(05-12-2018, 07:50 PM)illwieckz Wrote: Hi!
Raspberry Pi runs Linux but on a different hardware than traditional PC, the executable you downloaded is built for x86 processors (by Intel or AMD for example) and will not run on a Raspberry Pi which has an ARM processor. Sadly, unless someone or yourself rebuild the game for ARM (I even don't know if it's possible), you can't run Xonotic on a Pi, and I really don't know if a Pi is powerful enough.

(05-13-2018, 11:45 AM)_para Wrote: I think you should be able to compile/build xonotic on linux runnin on arm just like on any other processor using the linux guide to build the game. You might not even run into dependency issues like me on win.

I'm really curious if it works as I have similar plans but I haven't even a raspberry pi nor other sbc to try out. :c

(04-24-2020, 05:06 AM)dagelf Wrote: You can just:

Code:

sudo apt install darkplaces

And then unzip xonotic-0.8.2.zip to anywhere, say:

Code:

mkdir -p /usr/share/games/
cd /usr/share/games
unzip ~/Downloads/xonotic-0.8.2.zip

And then run it:

Code:

darkplaces -xonotic -basedir /usr/share/games/Xonotic

You will need a Pi with 2GB at least.

If you want to play solo, on 1 1GB Pi:

Code:

sudo apt install nexuiz

Works fine.

If you've got problems:

Code:

raspbi-config

Look under advanced, and choose a different GL mode. Reboot. Try again.