+- Xonotic Forums (https://forums.xonotic.org)
+-- Forum: Support (https://forums.xonotic.org/forumdisplay.php?fid=3)
+--- Forum: Xonotic - Server Administration (https://forums.xonotic.org/forumdisplay.php?fid=16)
+--- Thread: Server appears to launch but is not in the server list (/showthread.php?tid=3118)
Server appears to launch but is not in the server list - TickleMeElmo - 06-09-2012
This i what i see in console.
Game is Xonotic using base gamedir data
Xonotic Windows64 17:18:47 Mar 8 2012 - release
Skeletal animation uses SSE code path
execing quake.rc
execing default.cfg
execing defaultXonotic.cfg
Warning: Could not expand $vid_width
Warning: Could not expand $vid_height
Warning: Could not expand $vid_pixelheight
execing sRGB-disable.cfg
menu: program is not loaded
execing weapons.cfg
Warning: Could not expand $r_showsurfaces
Warning: Could not expand $r_ambient
Warning: Could not expand $gl_finish
Warning: Could not expand $vid_gl20
Warning: Could not expand $vid_gl13
Warning: Could not expand $r_drawviewmodel
execing cdtracks.cfg
execing balanceXonotic.cfg
execing ctfscoring-ai.cfg
execing effects-normal.cfg
execing physicsX.cfg
execing turrets.cfg
execing unit_machinegun.cfg
execing unit_hk.cfg
execing unit_hellion.cfg
execing unit_mlrs.cfg
execing unit_flac.cfg
execing unit_fusreac.cfg
execing unit_plasma.cfg
execing unit_plasma2.cfg
execing unit_tesla.cfg
execing unit_phaser.cfg
execing unit_walker.cfg
execing unit_ewheel.cfg
execing vehicles.cfg
execing vehicle_racer.cfg
execing vehicle_raptor.cfg
execing vehicle_spiderbot.cfg
execing vehicle_bumblebee.cfg
execing crosshairs.cfg
execing commands.cfg
Warning: Could not expand $qport in alias _if_dedicated
execing _hud_common.cfg
execing _hud_descriptions.cfg
execing hud_luminos.cfg
execing config.cfg
"maxplayers" set to "16"
execing data/campaign.cfg
execing config_update.cfg
execing font-xolonium.cfg
Warning: Could not expand $scr_loadingscreen_barheight
Warning: Could not expand $scr_infobar_height
Warning: Could not expand $scr_centersize
This command only works on clients: cl_cmd hud scoreboard_columns_set
execing autoexec/empty.cfg
execing autoexec.cfg
Loaded public key key_0.d0pk (fingerprint: Xon//KssdlzGkFKdnnN4sgg8H+koTbBn5JTi3
7BAW1Q=)
Loaded private ID key_0.d0si for key_0.d0pk (public key fingerprint: i7rKYRJbW8X
Rp6JnZdB6DrhjcKYZkpAi5e6bNYX6qxY=)
NOTE: this ID has not yet been signed!
Only need a signature for an existing key...
curl failed
Server using port 26000
Server listening on address 0.0.0.0:26000
Server listening on address [0:0:0:0:0:0:0:0]:26000
execing server.cfg
Game type successfully switched to dm
Host_Mingled: time stepped forward (went from 0.000000 to 2589.803000, differenc
e 2589.803000)
Server using port 26000
Server listening on address 192.168.1.34:26000
Server listening on address [0:0:0:0:0:0:0:0]:26000
The problem is don't see the server even on my own lan. I have verified that there is a rule to allow the dark places engine in windows firewall.
I also have port forwarding in place, and 26000 is open.
From the server i can ping the gateway, i can ping dns, and surf the web. I was also able to rdp to and from the server.
I have the config in the /data folder (it's windows).
Any ideas?
RE: Server appears to launch but is not in the server list - Mr. Bougo - 06-09-2012
Quote:Server listening on address 192.168.1.34:26000
How many network interfaces do you have on your PC? You only need to set net_address if you have several IP addresses. Set it back to "" in server.cfg if you only have one.
If it still doesn't work, double-check any software firewall you might have. Disable the windows firewall temporarily.
RE: Server appears to launch but is not in the server list - TickleMeElmo - 06-09-2012
I reset the net address to default. I also disabled windows firewall. It still does not appear in the server list window. However, i was able to manually enter the local address of the server and connect to it from another pc on the same network.
RE: Server appears to launch but is not in the server list - Mr. Bougo - 06-09-2012
That's really strange, the LAN querying should be done through the same port as the rest. I have no idea why it doesn't work. What's the value of sv_public? Can your server be reached from the internet by IP too?
RE: Server appears to launch but is not in the server list - TickleMeElmo - 06-09-2012
sv_public is uncommented and set to 1. I don't have a box out side the network i can connect in to see. Could you try?
70.177.115.101:26000
The sever host name is "IT FUCKING WORKS" so it should be easy to spot if for some reason it is visible to you.
RE: Server appears to launch but is not in the server list - Mr. Bougo - 06-09-2012
It works but the server doesn't talk to the master server for some reason.
It can be queried just fine (see this) and I can connect to it. I don't understand why the master server wouldn't list it, if not because of a firewall blocking the packets somewhere somehow.